Step Level Procedure for Remaining Fatigue Life Evaluation of One Railway Bridge

Authors

  • Alessio Pipinato Dept of Construction and Transportation, University of Padua, Via Marzolo 9 – 35131 Padova, Italy

DOI:

https://doi.org/10.3846/bjrbe.2010.04

Keywords:

bridge, fatigue, assessment, steel, rivet, reliability

Abstract

Reliable structural integrity and remaining life assessment are essential for infrastructural ageing mitigation of. For example, as a consequence of the lack of new riveted steel bridges, less attention has been paid in order to deep the topic of fatigue strength behavior and in particular less research has been focused on the topic of the remaining fatigue life of riveted structure. As a consequence, a series of diagnostic tests were performed on one short-span, twolane, historical railway steel-girder bridge, in service from 1918. In this article are presented results concerning the step by step fatigue assessment of the bridge investigated: the safe condition of the bridge after almost a century service life period, apart from a dangerous failure mechanism have been evidenced, as confirmed by the analytical procedure and the experimental results reported.

References

Al-Emrani, M; Kliger, R. 2003. FE Analysis of Stringer-to-Floor-Beam Connections in Riveted Railway Bridges, Journal of Constructional Steel Research 59(7): 803–818. doi:10.1016/S0143-974X(02)00114-1

Astaneh-Asl, A. 2008. Progressive Collapse of Steel Truss Bridges, the Case of I-35W Collapse, Invited Keynote paper, in Proc of the 7th International Conference on Steel Bridges. June 4–6, 2008. Guimarăes, Portugal.

Boulent, M. I.; Righiniotis, T. D.; Chryssanthopoulos, M. K. 2008. Probabilistic Fatigue Evaluation of Riveted Railway Bridges,

Journal of Bridge Engineering 13(3): 237–244. doi:10.1061/(ASCE)1084-0702(2008)13:3(237)

Brencich, A.; Gambarotta, L. 2009. Assessment Procedure and Rehabilitation of Riveted Railway Girders: The Campasso Bridge, Engineering Structures 31(1): 224–239. doi:10.1016/j.engstruct.2008.07.007

Bursi, O. S.; Ferrario, F.; Fontanari, V. 2002. Non-Linear Analysis of the Low-Cycle Fracture Behavior of Isolated Tee Stub Connections, Computers & Structures 80(27–30): 2333–2360. doi:10.1016/S0045-7949(02)00252-3

DiBattista, J. D.; Adamson, D. E.; Kulak, G. L. 1997. Fatigue Strength of Riveted Connections, Journal of the Structural Engineering 124(7): 792–797. doi:10.1061/(ASCE)0733-9445(1998)124:7(792)

Frangopol, D. M.; Strauss, A.; Bergmeister, K. 2009. Lifetime Cost Optimization of Structures by a Combined Condition-Reliability Approach, Engineering Structures 31(7): 1572–1580. doi:10.1016/j.engstruct.2009.02.036

Kala, Z. 2007. Influence of Partial Safety Factors on Design Reliability of Steel Structures – Probability and Fuzzy Probability Assessments, Journal of Civil Engineering and Management 13(4): 291–296.

Kala, Z. 2008. Fuzzy Probability Analysis of the Fatigue Resistance of Steel Structural Members under Bending, Journal of Civil Engineering and Management 14(1): 67–72. doi:10.3846/1392-3730.2008.14.67-72

Kamaitis, Z. 2006. Deterioration of Bridge Deck Roadway Members. Part I: Site Investigations, The Baltic Journal of Road and Bridge Engineering 1(4): 177–184.

Kulak, G. L. 2000. Fatigue Strength of Riveted Shear Splices, Progress in Structural Engineering and Materials 2(1): 110–119. doi:10.1002/(SICI)1528-2716(200001/03)2:1<11 0::AIDPSE13>3.0.CO;2-6

Kunz, P.; Hirt, M. A. 1992. Reliability of Railway Bridges under Fatigue Loading, in Proc of the 3rd International Workshop on Bridge Rehabilitation “Bridge Rehabilitation”. Ed. by König, G..; Nowak, A. S. June 14–17, 1992, Darmstadt, Germany. Berlin: Ernst and Sohn, 515–528.

Kühn, B.; Luki, M.; Nussbaumer, A.; Günther, H.-P.; Helmerich, R.; Herion, S.; Kolstein, M. H.; Walbridge, S.; Androic, B.; Dijkstra, O.; Bucak, Ö. 2008. Assessment of Existing Steel Structures: Recommendations for Estimation of Remaining Fatigue Life, Joint Report Prepared under the JRC_ECCS cooperation agreement for the evolution of Eurocode 3 (programme of CEN/TC 250). Ed by Sedlacek G.; Bijlaard, F.; Géradin, M.; Pinto, A.; Dimora, S. 1st edition. Background documents in support to the implementation, harmoniza tion and further development of the Eurocodes. February 2008, EUR 23252 EN

Petcherdchoo, A.; Neves, L. A. C.; Frangopol, D. M. 2008. Optimizing Lifetime Condition and Reliability of Deteriorating Structures with Emphasis on Bridges, Journal of Structural Engineering 134(4): 544–552. doi:10.1061/(ASCE)0733-9445(2008)134:4(544)

Pipinato, A. 2008. High Cycle Fatigue Behaviour of Historical Metal Riveted Railway Bridges. PhD thesis 2008: University of Trento, University of Padua, in collaboration with RFI-Rete Ferroviaria Italiana and FIP Industriale, Publischer University of Trento, Trento. 336 p.

Pipinato, A.; Pellegrino, C.; Modena, C. 2008. Evaluation and Fatigue Strength of One Riveted Historical Railway Bridge, in Proc of the 4th International Conference on Bridge Maintenance, Safety and Management (IABMAS’08) “Bridge Maintenance, Safety Management, Health Monitoring and Informatics”. 1st edition. Ed. by Hyun-Moo Koh, H. M.; Frangopol, D. M. July 13–17, 2008, Seoul, Korea. London: Taylor and Francis. ISBN: 0415468442

Pipinato, A.; Molinari, M.; Pellegrino, C.; Bursi, O.; Modena, C. 2009a. Fatigue Tests on Riveted Steel Elements Taken from a Railway Bridge, Structure and Infrastructure Engineering 5(4). doi:10.1080/15732470903099776

Pipinato, A.; Pellegrino, C.; Bursi, O.; Modena, C. 2009b. Highcycle Fatigue Behavior of Riveted Connections for Railway Metal Bridges, Journal of Constructional Steel Research 65(12): 2167–2175. doi:10.1016/j.jcsr.2009.06.019

Downloads

Published

27.03.2010

How to Cite

Pipinato, A. (2010). Step Level Procedure for Remaining Fatigue Life Evaluation of One Railway Bridge. The Baltic Journal of Road and Bridge Engineering, 5(1), 28-37. https://doi.org/10.3846/bjrbe.2010.04