Submissions


Login or Register to make a submission.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

    1. That this manuscript is original, and has not been formally published (in a journal or book) previously, and is not currently under consideration by any other journal or book.
    2. That the authors have taken due care and attention to ensure the integrity of the research reported in this article, and that the contents of the article are – to the best knowledge of the authors – true and that the article does not misrepresent any facts.
    3. That all co-authors of this manuscript are aware of, and in agreement with, the terms of this agreement and that the submitted manuscript has been approved by these authors.
    4. That if the authors have any competing interests or other conflicts that may bias their article (e.g. financial support) that these are fully disclosed to the editors and within the article..
    5. Email addresses of all co-authors will be provided by the submitting author during the submission process.
    6. The submission file is in OpenOffice, Microsoft Word, or RTF document file format, and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
    7. All figures are also uploaded separately in high-resolution as additional files (1200 dpi for line art, 600 dpi for grayscale and 300 dpi for colour). None of them exceeds 20MB.
    8. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines of this journal. Where available, DOIs or URLs to the references are provided.

Author Guidelines

Submission

All submissions should be made online at the the Baltic Journal of Road and Bridge Engineering site https://bjrbe-journals.rtu.lv by using "Submit an Article" button.

New users will need to create an account. Once logged on to the site authors may make a submission or check the status of the manuscript.

Peer-review and decisions

The journal uses double-blind peer review (neither the authors nor the reviewers know the identity of each other) to avoid bias. See the journal policies Peer review.

Manuscripts should be submitted as two separate files in Word format (see in Template of a manuscript).

After submission all articles are evaluated by the editorial office and may be immediately rejected if they are considered to be out of the journal's scope or otherwise unfit for consideration. Articles which passed initial evaluation will be sent out for external review. Reviewer reports with a decision from the editor will be returned to the authors as soon as possible, but please be patient as reviewing can take up to 60 days.

After review, the editor will make a decision of: reject, accept, or revise. Revisions may be major or minor. If a decision of revision is made, authors are asked to make their revisions as quickly as possible – if there are extensive delays in revising an article then it may be considered a new submission. Revised articles may be sent out for review again, depending on the level of revision requested.

Publication charges

The journal is an open access peer-reviewed journal owned by Riga Technical University (RTU). It is completely free of charges (APC and submission charges) to both authors and readers. All publication fees are covered by Riga Technical University and the Baltic Road Association.

See the journal policies Fees and Charges.

Copyright and publication

During submission you will be asked to sign documents (Licence to Publish, Conflict of Interest declaration form) about the article (see Journal policies). These include affirming that it is original and does not infringe any legal or personal rights (e.g. copyright, libel or privacy). Authors retain copyright in their articles, but grant RTU Press the right of the first publication.

All papers will be published open access under a Creative Commons CC BY 4.0 licence. This ensures that they receive the maximum dissemination because there are no barriers to access. This licence allows readers to disseminate and reuse the paper, but always requires them to grant the authors and the first publication full credit.

See Open Access Policy of Riga Technical University.

Article types

The journal welcomes all original submissions of articles and reviews that comply with the Aims and Scope of the journal.

All submissions must be original papers, and not be under consideration by a journal elsewhere.

If the paper contains anything that has already been published (e.g. figures) then this must be declared and authors are responsible for obtaining relevant permissions to republish. Evidence of permission granted must be available if requested – see in Reproduction of copyright material.

Template of a manuscript

The paper should be submitted in two different word documents.

The linked <Word template for Title Page> and <Word template for Anonymized Document> should be used for the preparation of the manuscript for this journal.

Title page should include a title of the paper, author's names, institutional affiliations, addresses, e-mails, ORCID, identification of the corresponding author, abstract and keywords of the paper. Acknowledgements, Funding, Disclosure statement, and Contribution should be provided in a title page in order to ensure author anonymity.

Anonymized document should include a title, abstract, keywords, the main body text where personal data excluded in order to ensure author anonymity (it should be provided in title page) and references. The personal information will be included in the manuscript after peer-review process.

General guidelines

Only English language articles are accepted. Authors are responsible for the language quality in their article, and is strongly recommended to have your manuscript checked by a native speaker or an English language specialist before submission, in order to ensure that the language is acceptable.

For all manuscripts non-discriminatory language is mandatory. Sexist or racist terms must not be used.

Authors should provide the following information:

  • Full name
  • Affiliation (where the author was positioned when the research was undertaken – if authors change affiliation before publishing this should be given as a footnote)
  • Address
  • Email address
  • ORCID iD, this is not mandatory, but highly recommended for the benefit of authors: unique author identifier that ensures that all your works are correctly attributed to you – see https://orcid.org
  • Clear identification of the corresponding author (who will be responsible for ensuring that the correct version is submitted and that all authors agree to publication and approve any corrections during peer review and after acceptance).

Each article must comprise:

  • An informative title: ensure that it clearly explains what the article is about (not exceed 20 words)
  • An abstract of approximately 200 words: this should summarise the article, not simply introduce the topic
  •  Between 6–10 key words
  • The main body of text should not exceed 6000–8000 words and should comprise:
    • An introduction to the topic, describing the research question being addressed
    • Methodology and/or theoretical framework
    • Results of the research
    • Discussion and interpretation of results obtained
    • Conclusions
    • Acknowledgements, funding, declarations of conflict of interest, authors' contribution, etc.
    • References

Text sections may be numbered sequentially for clarity. Introduction, Conclusions, References are not numbered.

Authors must adhere to SI units. Units are not italicised. When using a word which is or is asserted to be a proprietary term or trade mark, authors must use the symbol ® or TM

Equations

Formulas, equations and their components presented in the text must be written in Equation Editor or MathType. The size of basic symbols in equations should correspond to the letter size of the main text – 10 pt; indexes should be in 7 pt, sub-indexes – 6 pt. For more details see the Template of the Manuscript.

Tables

Tables should be created in Word or Excel and should be designed so that they easily fit a regular journal page. Each table should be numbered sequentially throughout the article and mentioned in the main text.

Each table must have an informative caption to describe the table. They may have footnotes if explanations of abbreviations, etc., are required.

Figures

Figures may be supplied within the text file at submission, but on article acceptance they must be supplied as separate files.

Each figure should be numbered sequentially throughout the article and mentioned in the main text. Each figure must have an informative caption to describe the figure.

Please be sure that all figures are at the appropriate resolution: 1200 dpi for line art, 600 dpi for grayscale and 300 dpi for colour.

Diagrams, charts and schemes: font – Times New Roman from 5 to 8 pt, line thickness – from 0.3 to 2 pt, file formats – *.pdf, *.eps, *.cdr, *.xls, *.xlsx, *.dwg.

Author Contributions and Acknowledgments

Each person who made an intellectual contribution to the research, and the evaluation/analysis and to the writing of the article (see the ICMJE definition of authorship) should be named as an author.

People who contributed to the work (but do not fulfill the authorship criteria) should be listed in the Acknowledgments, along with their contributions. You must ensure that anyone named in the acknowledgments agrees to being named.

See the journal policies Authorship.

Conflict of Interest

Authors must also provide a disclosure statement within the article which will acknowledge any financial, professional, personal interest or benefit they have arising from the direct applications of their research.

Conflict of Interest Disclosure Form - Authors

Funding

Please supply all details required by any funding and grant-awarding bodies as Funding in a separate paragraph as follows:

  • For single agency grants:
    • This work was supported by the <Funding Agency> under Grant [number xxxx].
  • For multiple agency grants:
    • This work was supported by the <Funding Agency #1> under Grant [number xxxx]; <Funding Agency #2> under Grant [number xxxx]; and <Funding Agency #3> under Grant [number xxxx].

References

The Journal uses the APA Style (author-date method) short reference system for citations in the text with an alphabetical list at the end of the paper. Please ensure that every reference cited in the text is also present in the reference list and vice versa. Please check if all names and surnames of the authors, also the details (title, year, volume, pages, etc.) in the list of references are correct.

In the text use the following style examples:

  • This was discussed by Smart (2016)…" – single author item
  • This was discussed in full (Smart, 2016)" – single author item
  • This was discussed in full (Smart & Burkart, 2016)
  • This was discussed in full (Smart et al., 2016)…" – 3 or more authors
  • This was discussed in full (Smart, P., 2016, Smart S., 2017)…" where items have similar author names
  • This was discussed in full (Smart, 2016a, 2016b)…" where two or more items are published in the same year

Reference examples:

Book

  • Montgomery, D. C. (2012). Introduction to statistical quality control (7th ed.). New York: Wiley.

Book chapter

  • Slack, B. (2007). The terminalisation of seaports. In J. Wang, D. Olivier, T. Notteboom, & B. Slack (Eds.), Ports, cities, and global supply chains (pp. 41–50). Aldershot, UK: Ashgate.

Journal article

  • Badami, M. G., & Haider, M. (2007). An analysis of public bus transit performance in Indian cities. Transportation Research Part A: Policy and Practice, 41(10), 961–981. https://doi.org/10.1016/j.tra.2007.06.002

Conference proceedings

  • McGehee, D. V., Mazzae, E. N., & Baldwin, S. G. H. (2000). Driver reaction time in crash avoidance research: validation of a driving simulator study on a test track. In Proceedings of the IEA 2000/HFES 2000 Congress, San Diego, California, USA (pp. 320–323).
  • Sun, D., Lv, J., & Paul, L. (2008). Calibrating passenger car equivalent (PCE) for highway work zones using speed and percentage of trucks. In TRB 87th annual meeting compendium of papers, Washington, DC, 13–17 January 2008.

Thesis or dissertation

  • Abreha, D. A. (2007). Analysing public transport performance using efficiency measures and spatial analysis; the case study of Addis Ababa, Ethiopia. Ms Thesis, International Institute for Geo-Information Science and Earth Observation, Enschede, The Netherlands.

Internet documents

Non-book and other formats

  • Sidra Intersections. (2008). User guide-introduction. Akcelik & Associates Pty Ltd. 432 p.

Standards

  • British Standards Institute. (2000). BS 6349-1:2000: Maritime structures: Code of practice for general criteria.
  • Lithuanian Standards Board. (2010). LST EN 590:2009+A1:2010: Automobiliniai degalai. Dyzelinas. Reikalavimai ir tyrimo metodai [Automotive Fuels – Diesel – Requirements and Test Methods].

Directives

Data sets in repositories

  • Brembilla, E.; Chi-Pool, D.; Hopfe, C.; Mardaljevic, J. (2017). Inter-model comparison of five climate-based daylight modelling techniques: redirecting glazing/shading systems – input and output data. Figshare. https://doi.org/10.17028/rd.lboro.4650205.v1

Please use the transliterated (not translated) version of the names and sources in non-Romanian alphabet. We encourage to follow the rules for Romanization recommended by The Library of Congress https://www.loc.gov/catdir/cpso/roman.html

For citing papers published in the journals available in two or more languages, please give the English citation first, followed by the original language citation.

Supplemental online material

The journal can accept supplementary files that support the submitted article (e.g. audio, movie, or text files: for example a survey questionnaire which is described in the article). Supplemental information should be provided with the submission. It will not be formally reviewed but will be considered to determine whether it is required by the article. Please note that authors take full responsibility for the content of any supplemental information, and a disclaimer on the supplemental information must clearly state that they have not been formally reviewed.

Data

We encourage all researchers to archive and share their data. Several grant funders now require this, and we believe that it benefits research by enabling other researchers to reuse and reinterpret data for the benefit of all. We encourage all authors to make their data available in suitable repositories (for example FigShare, or other similar repository) where the item will be safely archived and given a unique reference number (DOI or similar) so that it can be cited in the authors' articles. They should then be referenced in the article (see an example ‘Data sets in repositories’ in References).

Reproduction of copyright material

If you wish to include any material in your manuscript in which you do not hold copyright, you must obtain written permission from the copyright owner, prior to submission. Such material may be in the form of text, data, table, illustration, photograph, line drawing, audio clip, video clip, film still, and screenshot, and any supplemental material you propose to include. This applies to direct (verbatim or facsimile) reproduction as well as “derivative reproduction” (where you have created a new figure or table which derives substantially from a copyrighted source).

You must ensure appropriate acknowledgment is given to the permission granted to you for reuse by the copyright holder in each figure or table caption. You are solely responsible for any fees which the copyright holder may charge for reuse.

The reproduction of short extracts of text for the purposes of criticism may be possible without formal permission on the basis that the quotation is reproduced accurately and full attribution is given.

Publication Ethics

The journals published by RTU Press all adhere to RTU Press Publication Ethics Guidelines and the Core Practices of the Committee on Publication Ethics (COPE, https://publicationethics.org/core-practices) and follow their guidelines in respect of publication ethics and managing problems when they arise.

All authors are expected to comply with good practice in regard to their research and the reporting of their research. See further in the Journal policies.

Authors' responsibilities include the following issues:

Plagiarism. The unattributed copying of another published or unpublished work, or the theft of the ideas of another researcher is considered a serious offence. If suspected authors will be contacted and – if under review – the article will be held until the issue is resolved. Note that all articles are checked for plagiarism when submitted.

Authorship: all people who comply with the definition of authors (above) should be named as authors on the article, and, similarly, nobody who does not comply should be included as an author. Authors may not be added or deleted after submission without full explanation and written consent of all authors.

Conflict of Interest: all authors must declare if they have any conflict of interest that may have biased either their research or the article submitted.

Misleading or misreporting of findings: authors are required to ensure that they do not selectively, or incorrectly, report their findings, or use language to mislead the readers.

In all cases, the publisher reserves the rights to contact the authors' institutions is serious misconduct has been identified, and to retract any articles in which serious misconduct has been identified.

Corrections after publication

If any errors are discovered after publication the journal editors, in partnership with RTU Press and the authors will determine the right method of correction. See the Journal policies.


Sections

  1. Articles
    • Open Submissions
    • Indexed
    • Peer Reviewed


Privacy Statement

Thank you for visiting Baltic Journal of Road and Bridge Engineering website or registering a user account on the Baltic Journal of Road and Bridge Engineering website.

Contact

The Baltic Journal of Road and Bridge Engineering website is owned by Riga Technical University (RTU).

If you have questions, concerns or suggestions related to our Privacy Policy please contact us by email nadezda.lorence@rtu.lv

Use of cookies

What are cookies?

Cookies are small files saved to the user’s computer’s hard drive that track, save and store information about the user’s interactions and usage of the website. This allows the website, through its server to provide the users with a tailored experience within this website.

What do we use cookies for?

We may use cookies to remember personal settings you have chosen at our website. In no other context do we use cookies to collect information that identifies you personally. Most of the cookies we set are automatically deleted from your computer when you leave our website or shortly afterwards.

We use anonymous session cookies (short-term cookies that disappear when you close your browser) to help you navigate the website and make the most of the features. If you log into the website as a registered user, your session cookie may also contain your user ID so that we can check which services you are allowed to access. Where any personal data is collected it is relevant to purpose and only absolutely necessary personal details are recorded.

This website uses tracking software to monitor its visitors to better understand how they use it. This software is provided by Google Analytics which uses cookies to track visitor usage. The software will save a cookie to your computer’s hard drive in order to track and monitor your engagement and usage of the website, but will not store, save or collect personal information.

Should users wish to deny the use and saving of cookies from this website onto their computer’s hard drive, they should take necessary steps within their web browser’s security settings to block all cookies from this website and its external serving vendors.

Note that Internet browsers allow you to change your cookie settings via the “options” or “preferences” menu in your browser. Please note that if you set your browser to refuse or block all cookies, certain features or functionalities of our websites will be limited or unavailable to you.