Limit States of Shallow Bridge Foundations With Sheet Piling Covers
DOI:
https://doi.org/10.7250/bjrbe.2024-19.632Keywords:
bridge support, deformation of subsoil, displacements of bridge foundation, finite element method, sheet piling foundation cover, shallow bridge foundation, stresses in subsoil under foundationAbstract
This article presents an analytical method which takes into account the beneficial effects of the sheet piling located around the foundation in the calculations of ULS and SLS of shallow foundations. The analytical method proposed by the author was described in detail on the example of a “theoretical bridge” with the assumed geometry and loads as well as with the assumed subsoil and water conditions under the bridge. The stresses in the subsoil under the foundation and the settlement were determined. The author’s method was also used to calculate the foundation settlement of an “existing bridge” located in Gdańsk (Poland). In both cases, the results were compared with the results obtained using PLAXIS 3D Advanced 2023.1 and additionally with geodetic measurements for “existing bridge”. The author’s proposal was based on the EN 1997-1: Eurocode 7 standard applicable in the European Union. It has original elements that are not included in the cited standard. The proposed method is not the only one that could be used to assess the limit states of shallow foundations with sheet piling cover. However, it is based on the applicable regulations, gives similar results to the results obtained with FEM and geodetic measurements.
References
European Committee for Standardization. (2004). EN 1997-1+AC:2009+A1:2013: Eurocode 7: Geotechnical design – Part 1: General rules. https://www. ngm2016.com/uploads/2/1/7/9/21790806/eurocode_7_-_geotechnical_designen.1997.1.2004.pdf
European Committee for Standardization. (2007). EN 1997-2:2007+AC:2010: Eurocode 7: Geotechnical design–Part 2: Ground investigation and testing. https://www.phd.eng.br/wp-content/uploads/2015/02/en.1997.2.2007-1.pdf
Frank, R., Bauduin, C., Driscoll, R., Kavvadas, M., Krebs Ovesen, N., Orr, T., Schuppener, B., & Gulvanessian, H. (2005, reprinted: 2009 & 2013). Designers’ Guide to EN 1997-1 Eurocode 7: Geotechnical Design – General Rules. Publishing: Thomas Telford Ltd., London, United Kingdom of Great Britain and Northern Ireland.
Higuchi, S., Nishioka, H., Tanaka, K., Koda, M., Hirao, J., Tsuji, N., Tateyama, M., & Matsuda, T. (2008). Development of the sheet-pile foundation; A new seismic resistant foundation. The 14-th World Conference on Earthquake Engineering, Beijing, China. https://www.iitk.ac.in/nicee/wcee/article/14_12-01-0064.PDF
Mieszczuk, A., & Jumas, L. (2009). Construction design with As-built Documentation, Reconstruction of the bridge in Stroma Street over the Radunia Canal in Gdańsk.
PLAXIS 3D 2023.1. (2023). Advanced [computer software]: Bentley Systems, Incorporated.
PLAXIS 3D 2023.1 – Reference Manual 3D. (2023). Bentley Systems, Incorporated. Retrieved from: Manuals - PLAXIS - GeoStudio | PLAXIS Wiki - GeoStudio | PLAXIS - Bentley Communities
Siwowski, T., Trojnar, K., Michalak, E., Sobala, D., Janas, L., Kulpa, M., & Duda,
A. (2020). Application of Eurocodes in bridge design. Publishing House of the Rzeszów University of Technology, Rzeszow, Poland.
Tikanta, T., Matsumoto, T., Tuan, V. A., Shimono, S., & Bamrungwong, C. (2016). Fundamental experiments on reinforcement of bridge pile foundations in Thailand using sheet pile wall. The 19th Southeast Asian Geotechnical Conference & 2nd AGSSEA Conference, Kuala Lumpur, Thailand, 605–610. https://www.researchgate.net/publication/319272745_Fundamental_Experiments_on_a_Reinforcement_Method_using_Sheet_Pile_Wall_for_Bridge_Pile_Foundations_Subjected_to_Pile_Embedment_Reduction_and_Numerical_Validation
Wilmers, W. (2012). Restoration of Masonry arch bridges, London. Bridge Engineering, 165(3), 135–146. https://doi.org/10.1680/bren.11.00011
Wymysłowski, M., & Kurałowicz, Z. (2012). Displacement of the bridge supports on the foundations covered by sheet piling. In A. Plichta, & I. Wyczałek (Eds.), The engineering application of geodesy, Poznań University of Technology, Poznan, Poland (pp. 131–140).
Wymysłowski, M., & Kurałowicz, Z. (2014). Analysis of displacements of the bridge abutment on the shallow foundation with the cover of sheet piling. Marine and Geotechnical Engineering, 2014(2), 129–139.
Wymysłowski, M., & Kurałowicz, Z. (2016). Study of displacements of a bridge abutment using FEM. Studia Geotechnica et Mechanica, 38(2), 61–70. https://doi.org/10.1515/sgem-2016-0020
Wymysłowski, M., & Kurałowicz, Z. (2022). Analysis of displacements of a bridge abutment on the pile foundation using Finite Element Method. Marine and Geotechnical Engineering, 2022(2), 78–92.
Wysokiński, L., Kotlicki, W., & Godlewski, T. (2011). Geotechnical designing according to Eurocode 7: Handbook. Building Research Institute, Warsaw, Poland.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Michał Wymysłowski (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.