Effects of Carbon Fibre on Performance Properties of Asphalt Mixtures

Authors

DOI:

https://doi.org/10.7250/bjrbe.2020-15.472

Keywords:

asphalt, carbon fibre, Marshall stability, moisture resistance, rutting resistance, stiffness modulus

Abstract

In this study, the effects of carbon fibre on improving the performance characteristics of asphalt mixtures were investigated. To this end, four percentages of carbon fibre (0%, 0.3%, 0.5%, and 0.7% by weight of bitumen) were used as an additive in asphalt mixtures. The mechanical properties of prepared mixture specimens were investigated using tests such as Marshall Stability and flow, Indirect Tensile Stiffness Modulus, Creep Stiffness, Indirect Tensile Strength, and moisture resistance. The results of tests applied to asphalt mixtures showed that the carbon fibre additive increased the resistance to shear stress by 25%, the fatigue life by 51% at 40 °C and the permanent deformation resistance by 2.25 times at 60 °C. It also improved the resistance of mixtures to moisture damage by increasing the durability and cohesion of asphalt mixtures. Experimental results indicated that the carbon fibre provided a positive contribution to the performance properties of asphalt pavements.

References

AASHTO T283 Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage

Abtahi, S. M., Sheikhzadeh, M., & Hejazi, S. M. (2010). Fiber-reinforced asphalt-concrete – a review. Construction and Building Materials, 24(6), 871-877. https://doi.org/10.1016/j.conbuildmat.2009.11.009

ASTM C-127 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate

ASTM C-128 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate

ASTM C-88 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

ASTM D6931-17:2017 Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures

ASTM D113 Standard Test Method for Ductility of Asphalt Materials

ASTM C131 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

ASTM D1559 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus

ASTM D2170/D2170M Standard Test Method for Kinematic Viscosity of Asphalts ASTM D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)

ASTM D5 Standard Test Method for Penetration of Bituminous Materials

ASTM D70 Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)

ASTM D-854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

BS EN 12697-25:2016 Bituminous Mixtures. Test Methods. Cyclic Compression Test

BS EN 12697-26:2018 Bituminous Mixtures. Test methods. Stiffness

Chung, D. D., & Chung, D. (2012). Carbon fiber composites. Elsevier.

Cleven, M. A. (2000). Investigation of the properties of carbon fiber modified asphalt mixtures (Master’s thesis, Michigan Technological University).

Cong, P., Xu, P., & Chen, S. (2014). Effects of carbon black on the anti-ageing, rheological and conductive properties of SBS/asphalt/carbon black composites. Construction and Building Materials, 52, 306-313. https://doi.org/10.1016/j.conbuildmat.2013.11.061

Echols, J. B. (1989). New mix method for fiber-reinforced asphalt. Public Works, 119(8).

Fitzgerald, R. (2000). Novel Application of Carbon Fiber for Hot Mix Asphalt Reinformortar and Carbon-carbon Pre-forms (Doctoral dissertation, Master’s Thesis, Michigan Technological University, Houghton, MI, USA).

García, Á., Schlangen, E., van de Ven, M., & Liu, Q. (2009). Electrical conductivity of asphalt mortar containing conductive fibers and fillers. Construction and building materials, 23(10), 3175-3181. https://doi.org/10.1016/j.conbuildmat.2009.06.014

EN 12593:2015 Bitumen and Bituminous Binders – Determination of the Fraass Breaking Point

Jahromi, S. G., & Khodaii, A. (2008). Carbon fiber reinforced asphalt concrete. Arabian Journal for Science & Engineering (Springer Science & Business Media BV), 33.

Krayushkina, K., Prentkovskis, O., Bieliatynskyi, A., Gigineishvili, J., Skrypchenko, A., Laurinavičius, A., Gopalakrishnan, K., & Tretjakovas, J. (2016). Perspectıves on usıng basalt fıber fılaments ın the constructıon and rehabılıtatıon of hıghway pavements and aırport runways. The Baltic Journal of Road and Bridge Engineering, 11(1), 77–83. https://doi.org/10.3846/bjrbe.2016.09

Labib, M., & Maher, A. (1999). Recycled plastic fibers for asphalt mixtures (No. FHWA NJ 2000-04).

Lee, S. J., Rust, J. P., Hamouda, H., Kim, Y. R., & Borden, R. H. (2005). Fatigue cracking resistance of fiber-reinforced asphalt concrete. Textile Research Journal, 75(2), 123-128. https://doi.org/10.1177/004051750507500206

Lima, M. S. S., Thives, L. P., Haritonovs, V., & Bajars, K. (2017, October). Red mud application in construction industry: Review of benefits and possibilities. In IOP Conference Series: Materials Science and Engineering (Vol. 251, No. 1, p. 012033). IOP Publishing. https://doi.org/10.1088/1757-899X/251/1/012033

Liu, X., & Wu, S. (2011). Study on the graphite and carbon fiber modified asphalt concrete. Construction and Building Materials, 25(4), 1807-1811. https://doi.org/10.1016/j.conbuildmat.2010.11.082

Liu, X., Liu, W., Wu, S., & Wang, C. (2014). Effect of carbon fillers on electrical and road properties of conductive asphalt materials. Construction and Building Materials, 68, 301-306. https://doi.org/10.1016/j.conbuildmat.2014.06.059

Liu, X., Wu, S., Li, N., & Gao, B. (2008). Self-monitoring application of asphalt concrete containing graphite and carbon fibers. Journal of Wuhan University of Technology-Mater. Sci. Ed., 23(2), 268. https://doi.org/10.1007/s11595-006-2268-2

Morgan, P. (2005). Carbon fibers and their composites. CRC press.

Munn, W. D. (1989). Fiber-reinforced hot mix promises improved stability. Highways and Heavy Construction, 132(10).

Okuda, K. (1990). Carbon fibers and their composites. In Transactions of the Materials Research Society of Japan (pp. 119-139). Springer, Dordrecht. https://doi.org/10.1007/978-94-009-0789-8_8

Serfass, J. P., & Samanos, J. (1996). Fiber-modified asphalt concrete characteristics, applications and behavior. Asphalt Paving Technology, 65, 193-230.

Vaitkus, A., Gražulytė, J., Vorobjovas, V., Šernas, O., & Kleızıenė, R. (2018). Potential of mswi bottom ash to be used as aggregate in road building materials. The Baltic Journal of Road and Bridge Eng., 13(1), 77–86. https://doi.org/10.3846/bjrbe.2018.401

Wang, Z., Gao, J., Ai, T., & Zhao, P. (2014). Laboratory investigation on microwave deicing function of micro surfacing asphalt mixtures reinforced by carbon fiber. Journal of Testing and Evaluation, 42(2), 498-507. https://doi.org/10.1520/JTE20130118

Wiljanen, B. R. (2003). The pavement performance and life-cycle cost impacts of carbon fiber modified hot mix asphalt (Doctoral dissertation, Michigan Technological University).

Wu, S., Ye, Q., Li, N., & Yue, H. (2007). Effects of fibers on the dynamic properties of asphalt mixtures. Journal of Wuhan University of Technology-Mater. Sci. Ed., 22(4), 733-736. https://doi.org/10.1007/s11595-006-4733-3

Xiong, R., Fang, J., Xu, A., Guan, B., & Liu, Z. (2015). Laboratory investigation on the brucite fiber reinforced asphalt binder and asphalt concrete. Construction and Building Materials, 83, 44-52. https://doi.org/10.1016/j.conbuildmat.2015.02.089

Zhao, S. Q. (2012). Study on Short Carbon Fiber Asphalt Concrete Marshall. In Advanced Materials Research (Vol. 529, pp. 446-449). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMR.529.446

Zoorob, S. E., & Suparma, L. B. (2000). Laboratory design and investigation of the properties of continuously graded Asphaltic concrete containing recycled plastics aggregate replacement (Plastiphalt). Cement and Concrete Composites, 22(4), 233-242. https://doi.org/10.1016/S0958-9465(00)00026-3

Downloads

Published

25.06.2020

How to Cite

Geckil, T., & Ahmedzade, P. (2020). Effects of Carbon Fibre on Performance Properties of Asphalt Mixtures. The Baltic Journal of Road and Bridge Engineering, 15(2), 49-65. https://doi.org/10.7250/bjrbe.2020-15.472