Behaviour of a Clay and Gravel Mixture




clay, gravel content, gravel shape, laboratory tests


In most construction works, crushed rock aggregates with angular shape are used as subgrade materials. However, naturally available rounded granular aggregates could be utilized in design of subgrade layers as an alternative material for economic and environmental reasons. Therefore, a comparative study on the road pavement subgrade using aggregates of two different shapes (angular and rounded) of the same size (10–19 mm) has been conducted in this paper. The California Bearing Ratio and unconfined compressive strength tests were carried out on the mixtures of clay and different contents (0%, 5%, 10%, 15%, and 20% by dry weight) of both aggregates in order to evaluate the influence of the shape of these aggregates on the testing results. It was found that the mixtures with the rounded gravels showed a greater maximum dry density, unconfined compressive strength and CBR value, as well as lower optimum water content value, than those with the angular gravels.


ASTM D1557. (2009). Standard test methods for laboratory compaction characteristics of soil using modified effort. American Society for Testing and Materials International, West Conshohocken.

ASTM D1883. (2011). Standard test method for California bearing ratio of laboratory compacted soils. American Society for Testing and Materials International, West Conshohocken.

ASTM D2166. (2000). Standard test method for unconfined compressive strength of cohesive soils. American Society for Testing and Materials International, West Conshohocken.

ASTM D2435. (2011). Standard test methods for One-Dimensional Consolidation properties of soils using incremental loading. American Society for Testing and Materials International, West Conshohocken.

ASTM D4318. (2010). Standard test methods for liquid limit, plastic limit, and plasticity index of soils. American Society for Testing and Materials International, West Conshohocken.

Cabalar, A. F., & Hasan, R. A. (2013). Compressional behaviour of various size/ shape sand–clay mixtures with different pore fluids. Engineering Geology, 164, 36–49.

Cabalar, A. F., Karabash, Z., & Mustafa, W. S. (2014). Stabilising a clay using tyre buffings and lime. Road Materials and Pavement Design, 15(4), 872–891.

Cabalar, A. F., & Mustafa, W. S. (2017). Behaviour of sand-clay mixtures for road pavement subgrade. International Journal of Pavement Engineering, 18(8), 714–726.

Cabalar, A. F., Demir, S., & Khalaf, M. M. (2021). Liquefaction resistance of different size/shape sand-clay mixtures using a pair of bender element – mounted molds. Journal of Testing and Evaluation, 49(1), 509-524.

Cho, G. C., Dodds, J., & Santamarina, J. C. (2006). Particle shape effects on packing density, stiffness, and strength: natural and crushed sands. Journal of Geotechnical and Geoenvironmental Engineering, 132(5), 591–602.

Kyambadde, B. S., & Stone, K. (2012). Index and strength properties of clay gravel mixtures. Proceedings of the Institution of Civil Engineers – Geotechnical Engineering, 165(1), 13–21.

Li, Y. (2013). Effects of particle shape and size distribution on the shear strength behavior of composite soils. Bulletin of Engineering Geology and the Environment, 72, 371–381.

Mirghasemi, A. A., Rothenburg, L., & Matyas, E. L. (2002). Influence of particle shape on engineering properties of assemblies of two-dimensional polygon-shaped particles. Geotechnique, 52(3), 209–217.

Monkul, M. M., & Ozden, G. (2007). Compressional behavior of clayey sand and transition fines content. Engineering Geology, 89(3–4), 195–205.

Monkul, M. M., Etminan, E., & Senol, A. (2017). Coupled influence of content, gradation and shape characteristics of silts on static liquefaction of loose silty sands. Soil Dynamics and Earthquake Engineering, 101, 12–26.

Monjezi, M., Shahriar, K., Dehghani, H., & Namin F.S. (2009). Environmental impact assessment of open pit mining in Iran. Environmental Geology, 58, 205–216.

Muszynski, M. R., & Vitton, S. J. (2012). Particle shape estimates of uniform sands: visual and automated methods comparison. Journal of Materials in Civil Engineering, 24(2), 194–206.

Naeini, S. A., & Baziar, M. H. (2004). Effect of fines content on steady-state strength of mixed and layered samples of a sand. Soil Dynamics and Earthquake Engineering, 24(3), 181–187.

Nocilla, A., & Zimbardo, M., Coop, M. R. (2019). Role of particle characteristics in the compression behaviour of gap-graded sands. Soils and Foundations, 59(3), 783–788.

Powers, M. C. (1953). A new roundness scale for sedimentary particles. SEPM Journal of Sedimentary Research, 23(2), 117–119.

Santamarina, J. C., & Cho, G. C. (2004). Soil behaviour: the role of grain shape. In R.J. Jardine, D.M. Potts, & K.G. Higgins (Eds.), Advances in Geotechnical Engineering: The Skempton Conference (604–617). Thomas Telford, London, UK.

Shen, Y., Zhu, Y., Liu, H., Li, A., & Ge, H. (2018). Macro-meso effects of gradation and grain morphology on the compressibility characteristics of calcareous sand. Bulletin of Engineering Geology and the Environment, 77(3), 1047–1055.

Siahaan, F., Indraratna, B., Ngo, N., Rujikiatkamjorn, C., & Heitor, A. (2018). Influence of grain gradation and shape on the performance of stone columns in soft clay. Geotechnical Testing Journal, 41(6), Article 20160234. https:// luence_of_Particle_Gradation_and_Shape_on_the_Performance_of_Stone_Columns_in_Soft_Clay

Simoni, A., & Houlsby, G. T. (2006). The direct shear strength and dilatancy of sand-gravel mixtures. Geotechnical & Geological Engineering, 24(3), Article 523.

Thevanayagam, S., & Mohan, S. (2000). Intergranular state variables and stress–strain behaviour of silty sands. Geotechnique, 50(1), 1–23.

Toyota, H., & Takada, S. (2019). Effects of gravel content on liquefaction resistance and its assessment considering deformation characteristics in gravel-mixed sand. Canadian Geotechnical Journal, 56(12).

Terzaghi, K. (1925). Erdbaumechanik auf bodenphysikalischer Grundlage. Franz Deuticke.

Yagiz, S. (2001). Brief note on the influence of shape and percentage of gravel on the shear strength of sand and gravel mixtures. Bulletin of Engineering Geology and the Environment, 60(4), 321–323.

Yun, T. S., & Santamarina, J. C. (2008). Fundamental study of thermal conduction in dry soils. Granular Matter, 10(3), Article 197.




How to Cite

Cabalar, A. F., Hama, S. O., & Demir, S. (2022). Behaviour of a Clay and Gravel Mixture. The Baltic Journal of Road and Bridge Engineering, 17(1), 98-116.