Compressibility of Fly Ash and Fly Ash-Bentonite Mixtures




bentonite, compressibility, compaction, consolidation, fly ash, road embankment materials


Environmental protection, one of the most important issues nowadays, forces civil engineers to look for alternative solutions to the known ones. The use of substitute materials as an embankment fill or a ground material under the embankment instead of natural soil follows these trends. A great amount of fly ash is disposed of in landfills. It is a cost-effective material that can be used in construction instead of natural soil. The geotechnical properties of fly ash as a construction material in place of soil need to be examined. It includes laboratory tests to determine the chemical composition and geotechnical characteristics. In the present work, one-dimensional consolidation tests have been conducted to examine the compressibility behaviour of compacted fly ash and fly ash-bentonite mixtures used in the earth structures like road embankments. The analysis of the consolidation phenomenon is useful for predicting the magnitude and rate of settlement of the structure. Materials compacted at OMC to their MDD, according to Standard Proctor, were tested in Rowe-Barden type consolidometer on saturated and non-saturated samples. Coefficients of consolidation have been compared between values derived from log-time and square-root-of-time methods and direct hydraulic conductivity tests. Bentonite amount in fly ash-bentonite mixtures influences the vertical deformation of the sample.


Announcement of the Minister of Infrastructure and Construction. (2016, December 23). Announcement of the Minister of Infrastructure and Construction on the publication of the uniform text of the Regulation of the Minister of Transport and Maritime Economy on technical conditions to be met by public roads and their location. Journal of Laws, 124.

ASTM International. (2019). Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete (ASTM C618-19).

British Standards Institute. (1990). Methods of test for soils for civil engineering purposes. Part 6. Consolidation and permeability tests in hydraulic cells and with pore pressure measurement (BS 1377-6:1990).

European Parliament. (2008, November 19). Directive 2008/98/EC of the European Parliament and of the Council on waste and repealing certain Directives.

European Committee for Standardization, CEN. (2002). Eurocode 1: Actions on structures - Part 1-1: General actions – Densities, self-weight, imposed loads for buildings (EN 1991-1-1).

Eurostat Database. (2021). Supply, transformation and consumption of solid fossil fuels.

Ghosh, A., & Subbarao, C. (2007). Strength characteristics of class F fly ash modified with lime and gypsum. Journal of Geotechnical and Geoenvironmental Engineering, 133(7), 757–766.

Gray, D. H., & Lin, Y. K. (1972). Engineering properties of compacted fly ash. Journal of the Soil Mechanics and Foundations Division, 98(4), 361–380.

Head, K. H. (1986). Manual of soil laboratory testing. Volume 3: Effective stress tests. London: Pentech Press.

Head, K. H., & Epps, R. (2011). Manual of soil laboratory testing. Volume 2: Permeability, shear strength and compressibility tests (3rd ed.). Dunbeath Mill: Whittles Publishing.

Head, K. H., & Epps, R. (2014). Manual of soil laboratory testing. Volume 3: Effective stress tests. (3rd ed.). Dunbeath Mill: Whittles Publishing.

Indraratna, B., Nutalaya, P., Koo, K. S., & Kuganenthira, N. (1991). Engineering behaviour of a low carbon, pozzolanic fly ash and its potential as a construction fill. Canadian Geotechnical Journal, 28(4), 542–555.

International Organization for Standardization. (2017). Geotechnical investigation and testing – Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2017).

Kaniraj, S. R., & Gayathri, V. (2004). Permeability and consolidation characteristics of compacted fly ash. Journal of Energy Engineering, 130(1), 18–43.

Kim, B., & Prezzi, M. (2008). Compaction characteristics and corrosivity of Indiana class-F fly and bottom ash mixtures. Construction and Building Materials, 22(4), 694–702.

Kim, B., Prezzi, M., & Salgado, R. (2005). Geotechnical properties of fly and bottom ash mixtures for use in highway embankments. Journal of Geotechnical and Geoenvironmental Engineering, 131(7), 914–924.

Lancellotta, R. (1995). Geotechnical engineering. Rotterdam: Balkema.

Leonards, G.A., & Bailey, B. (1982). Pulverized coal ash as structural fill. Journal of the Geotechnical Engineering Division, 108(4), 517–531.

Lipiński, M.J., & Wdowska, M. (2010). Saturation criteria for heavy overconsolidated cohesive soils. Annals of Warsaw University of Life Sciences – SGGW. Land Reclamation, 42(2), 295–302.

Martin, J. P., Collins, R. A., Browing, J. S., Biehl, F. J. (1990). Properties and use of fly ashes for embankments. Journal of Energy Engineering, 116(2), 71-85.

Mollamahmutoğlu, M., & Yilmaz, Y. (2001). Potential use of fly ash and bentonite mixture as liner or cover at waste disposal areas. Environmental Geology, 40(11–12), 1316–1324.

Pandian, N. S., & Balasubramonian, S. (1999). Permeability and consolidation behavior of fly ashes. Journal of Testing and Evaluation, 27(5), 337–342.

European Committee for Standardization. (2010). Unbound and hydraulically bound mixtures – Part 2: Test methods for laboratory reference density and water content – Proctor compaction (EN 13286-2:2010).

Porbaha, A., Pradhan, T. B. S., & Yamane, N. (2000). Time effect on shear strength and permeability of fly ash. Journal of Energy Engineering, 126(1), 15–31.

Sear, L.K.A. (2001). Properties and use of coal fly ash: A valuable industrial by-product. Thomas Telford Ltd., London.

Shahu, J., Yudhbir, T., & Kameswara Rao, N. S. V. (1999). Effective stress behavior of quasi-saturated compacted cohesive soils. Journal of Geotechnical and Geoenvironmental Engineering, 125(4), 322–329.

Sankar, V. S. R., & Niranjan, D. V. (2015). Effect of compaction conditions on the hydraulic and compressibility behaviour of fly ash-cement. International Journal of Engineering Research and Technology, 4(7), 365–378.

Sivapullaiah, P. V., & Moghal, A. (2011). CBR and strength behavior of class F fly ashes stabilized with lime and gypsum. International Journal of Geotechnical Engineering, 5(2), 121–130.

Skempton, A. W. (1954). The pore-pressure coefficients A and B. Geotechnique, 4(4), 143–147.

Statistical Yearbook of the Republic of Poland (2020). Statistics Poland. Warsaw.

Taylor, D. W. (1948). Fundamentals of soil mechanics. New York: Wiley.

Terzaghi, K., Peck, R. B., & Mesri, G. (1996). Soil mechanics in engineering practice. New York: Wiley.

Trivedi, A., & Sud, V. K. (2007). Settlement of compacted ash fill. Geotechnical and Geological Engineering, 25(2), 163–176.

Tu, W., Zand, B., Butalia, T. S., Ajlouni, M. A., & Wolfe, W. E. (2009). Constant rate of strain consolidation of resedimented Class F fly ash. Fuel, 88(7), 1154–1159.

Wasil, M. (2017). Prediction of hydraulic conductivity of fly ash built-in mineral sealing layers. Proceedings of the 10th International Conference “Environmental Engineering”. Vilnius, Lithuania, 27–28 April, 2017.

Wasil, M. (2020). Effect of bentonite addition on the properties of fly ash as a material for landfill sealing layers. Applied Sciences, 10(4), Article 1488.

Zabielska-Adamska, K. (2006a). Fly ash as a barrier material. Białystok: Bialystok University of Technology Publishing House.

Zabielska-Adamska, K. (2006b). Shear strength parameters of compacted fly ash – HDPE geomembrane interfaces. Geotextiles and Geomembranes, 24(2), 91–102.

Zabielska-Adamska, K. (2008). Laboratory compaction of fly ash and fly ash with cement additions. Journal of Hazardous Materials, 151(2–3), 481–489.

Zabielska-Adamska, K. (2018). One-dimensional compression and swelling of compacted fly ash. Geotechnical Research, 5(2), 96–105.

Zabielska-Adamska, K. (2020). Hydraulic conductivity of fly ash as a barrier material: some problems in determination. Environmental Earth Sciences, 79, Article 321.

Zabielska-Adamska, K., & Wasil, M. (2017). Tensile strength of barrier material. Proceedings of the 10th International Conference “Environmental Engineering”. Vilnius, Lithuania, 27–28 April 2017.




How to Cite

Wasil, M. (2022). Compressibility of Fly Ash and Fly Ash-Bentonite Mixtures. The Baltic Journal of Road and Bridge Engineering, 17(3), 21-43.