Analysis of the Self-Healing Process of Asphalt and its Influencing Factors




asphalt self-healing, different temperatures, four-component movement, matrix asphalt, molecular dynamics, self-healing mechanism


Molecular dynamics was used in this study to understand the self-healing behavior and mechanism of asphalt. Density, solubility, and mean square displacement parameters were analyzed to confirm the validity of the matrix asphalt model. Molecular simulation software was used to develop a microscopic matrix asphalt self-healing model at the nanoscale. Cracking width of asphalt microcracks was represented by setting different vacuum layer thicknesses as the asphalt self-healing model. Density and diffusion coefficient of the self-healing model were obtained by running the molecular software to understand the entire process of asphalt healing. The self-healing mechanism of the matrix asphalt was analyzed. Results showed that the entire self-healing process of asphalt could be clearly divided into four stages, namely, external environment energy endowment, model end healing, asphalt microcrack healing, and self-healing model self-diffusion stages. Molecules of each component in the asphalt self-healing process diffuse and move mutually under constant temperature conditions. The diffusion coefficient of saturated components and polar aromatic was higher than that of asphaltenes and aromatic components.


Bazin, P., & Saunier, J. B. (1967). Deformability, fatigue and healing properties of asphalt mixes. Proceedings of the Second International Conference on the Structural Design of Asphalt Pavements, Ann Arbor, Michigan, USA, 553–569.

Behnia, B, & Reis, H. (2019). Self-healing of thermal cracks in asphalt pavements. Construction and Building Materials, 218, 316–322.

Bunger, J. W., & Li, N. C. (1981). Chemistry of Asphaltenes. Advances in Chemistry Series 195. American Chemical Society, ACS Publications.

Cong, Y., Liao, K., & Zhai, Y. (2005). Application of molecular simulation in SBS modified asphalt. CIESC Journal, 56(5), 769–773.

Corbett, L. W. (1969). Composition of asphalt based on generic fractionation using solvent deasphaltening, elution-adsorption chromatography, and densimetric characterization. Anal. Chem., 41(4), 576–579.

Cui, P., Shao, M., & Sun, L. (2008). Investigación sobre el índice de diseño de pavimento de asfalto de larga duración. Journal of Traffic and Transportation Engineering, 3, 37–42.

Dan, H. C., Tan, J. W., & Chen, J. Q. (2019). Temperature distribution of asphalt bridge deck pavement with groundwater circulation temperature control system under high- and low-temperature conditions. Road Materials and Pavement Design, 20(3), 509–527.

Dong, Y. S., Hou, Y., Qian, Z.Y., & Wang, Z. F. (2019). Self-healing performance of rollable asphalt mixture. Journal of Materials in Civil Engineering, 31(7).

Du, Y., Chen, J., Han, Z., & Liu, W. (2018). A review on solutions for improving rutting resistance of asphalt pavement and test methods. Construction and Building Materials, 168, 893–905.

Fakhri, M., Bahmai, B. B., Javadi, S., & Sharafi, M. (2020). An evaluation of the mechanical and self-healing properties of warm mix asphalt containing scrap metal additives. Journal of Cleaner Production, 253, Article 119963.

Grossegger, D., & Garcia, A. (2019). Influence of the thermal expansion of bitumen on asphalt self-healing. Applied Thermal Engineering, 156, 23–33.

Groenzin, H., & Mullins, O. C. (2000). Molecular size and structure of asphaltenes from various sources. Energy Fuels, 14(3), 677–684.

Guo, M. (2016). Study on interaction mechanism and multi-scale evaluation method of asphalt aggregate interface. detail.aspx?dbname=CDFDLAST2017&filename=1016739838

Hansen, J. S., Lemarchand, C. A., Nielsen, E., Dyre, J. C., & Schroder, T. (2013). Four-component united-atom model of bitumen. The Journal of Chemical Physics, 138(9), Article 094508.

Jones, D. R. (1993). SHRP Materials Reference Library: Asphalt Cements: A Concise Data Compilation. Strategic Highway Research Program.

Long, Z., You, L., Tang, X., Ma, W., Ding, Y., & Xu, F. (2020). Analysis of interfacial adhesion properties of nanosilica modified asphalt mixtures using molecular dynamics simulation. Construction and Building Materials, 255, Article 119354.

Liu, J., Yu, B., & Hong, Q. (2020). Molecular dynamics simulation of distribution and adhesion of asphalt components on steel slag. Construction and Building Materials, 255, Article 119332.

Li, D. D., & Greenfifield, M. L. (2014). Viscosity, relaxation time, and dynamics within a model asphalt of larger molecules. The Journal of Chemical Physics, 140, Article 034507.

Li, D. D., & Greenfifield, M. L. (2014). Chemical compositions of improved model asphalt systems for molecular simulations. Fuel, 115, 347–356.

Painter, P.C. (1993). The characterization of asphalt and asphalt recyclability. Strategic Highway Research Program, Washington, DC.

Peng, A. P., Dan, H. C., & Yang, D. (2019). Experiment and numerical simulation of the dynamic response of bridges under vibratory compaction of bridge deck asphalt pavement. Mathematical Problems in Engineering, 2019, Article 7020298.

Qu, X., Liu, Q., Guo, M., Wang, D., & Oeser, M. (2018). Study on the effect of aging on physical properties of asphalt binder from a microscale perspective. Construction and Building Materials, 187, 718–729.

Robertson, R. E., Branthaver, J. F., Harnsberger P. M., Petersen, J. C., Dorrence, S. M., Mckay, J., Turner, T. F., Pauli, A. T., Huang, S. C., & Huh, J. D. (2001). Fundamental properties of asphalt and modified asphalts. Volume I: Interpretive Report (No. FHWARD-99-212).

Si, Z., Little, D. N., & Lytton, R. L. (2002). Characterization of microdamage and healing of asphalt concrete mixtures. Journal of Materials in Civil Engineering, 14(6), 461–470.

Shu, B., Wu, S., Dong, L., Norarnbuena-Contreras, J., Yang, X., Li, C., Liu, Q., & Wang, Q. (2019). Microfluidic synthesis of polymeric fibers containing rejuvenating agent for asphalt self-healing. Construction and Building Materials, 219, 176–183.

Shirzad, S., Hassan, M. M., Aguirre, M. A., & Mohammad, L. N. (2019). Rheological properties of asphalt binder modified with recycled asphalt fop materials and light-activated self-healing polymers. Construction and Building Materials, 220, 187–195.

Sun, G., Sun, D., Guarin, A., & Ma, J., Chen, F., & Ghafooriroozbahany, E. (2019). Low temperature self-healing character of asphalt mixtures under different fatigue damage degrees. Construction and Building Materials, 223, 870–882.

Storm, D. A., Edwards, J. C., DeCanio, S. J., & Sheu, E. Y. (1994). Molecular representations of Ratawi and Alaska north slope asphaltenes based on liquid- and solid-state NMR. Energy Fuels, 8(3), 561–566.

Sun, W., & Wang, H. (2019). Molecular dynamics simulation of diffusion coefficients between different types of rejuvenator and aged asphalt binder. International Journal of Pavement Engineering, 21(8), 966–976.

Sun, H., Ren, P., & Fried, J. R. (1998). The COMPASS force field: parameterization and validation for polyphosphazenes. Computational and Theoretical Polymer Science, 8(1–2), 229–246.

Sun, H., Jin, Z., Yang, C., Akkermans, R. L. C., Robertson, S. H., Spenley, N. A., Miller, S., & Todd, S. M. (2016). COMPASS II: extended coverage for polymer and drug-like molecule databases. Journal of Molecular Modeling, 22(2), Article 47.

Tang, W., Wang, J., & Lu, Y. (2020). Self-healing behavior of asphalt based on molecular dynamics. Journal of Wuhan University of Science and Technology, 2, 123–127.

Wang, H., & Al-Qadi, I. L. (2013). Importance of nonlinear anisotropic modeling of granular base for predicting maximum viscoelastic pavement responses under moving vehicular loading. Journal of Engineering Mechanics, 139(1), 29–38.

Wang, P., Zhai, F., Dong, Z., Wang, L., Liao, J., & Li, G. (2018). Micromorphology of asphalt modified by polymer and carbon nanotubes through molecular dynamics simulation and experiments: role of strengthened interfacial interactions. Energy Fuel, 32(2), 1179–1187.

Xu, O., Han, S., & Duan, X. (2010). Study on the maximum tensile strain due to fatigue of the mixture of asphalt modified with SBS. Journal of Construction Materials, 13(2), 193–197.

Xu, J. (2002). Study on self-healing characteristics of asphalt and asphalt mixture. Anhui Architecture, 27(09), 156–157. (in Chinese)

Xu, G, & Wang, H. (2017). Molecular dynamics study of oxidative aging effect on asphalt binder properties. Fuel, 188, 1–10.

Xu, G., Wang, H. (2016). Study of cohesion and adhesion properties of asphalt concrete with molecular dynamics simulation. Computational Materials Science, 112(A), 161–169.

Xu, M. (2019). Design and performance verification of asphalt reclaimer based on molecular diffusion and fusion mechanism. Harbin Institute of Technology. 37421fbf952d2243e635930068cb8/KCMS/detail/detail.aspx?dbname=CDFD LAST2021&filename=1020401841.nh

Xu, G., Wang, H., & Sun, W. (2017). Molecular dynamics study of rejuvenator effect on RAP binder: Diffusion behavior and molecular structure. Construction and Building Materials, 158, 1046–1054.

Xu, G., & Wang, H. (2018). Diffusion and interaction mechanism of rejuvenating agent with virgin and recycled asphalt binder: a molecular dynamics study. Molecular Simulation, 44(17), 1433–1443.

Xu, G., & Wang, H. (2016). Study of cohesion and adhesion properties of asphalt concrete with molecular dynamics simulation. Computational Materials Science, 112(A), 161–169.

Xu, G., & Wang, H. (2016). Molecular dynamics study of interfacial mechanical behavior between asphalt binder and mineral aggregate. Construction and Building Materials, 121, 246–254.

Yang, Z., Peng, H., Wang, W., & Liu, T. (2010). Crystallization behavior of poly(ɛ-caprolactone)/layered double hydroxide nanocomposites. Journal of Applied Polymer Science, 116, 2658–2667.

Zhang, Z., & Hu, C. (2001). Investigación y debate sobre varios temas del hormigón asfáltico reforzado con fibra. Revista dela Universidad Xi’an Hui lu Jiao tong, 21(1), 29–32.

Zhang, L. Q., & Greenfield, M. L. (2007). Analyzing properties of model asphalts using molecular simulation. Energy Fuels, 21(3), 1712–1716.

Zhang, L. Q., & Greenfield, M. L. (2008). Effects of polymer modification on properties and microstructure of model asphalt systems. Energy Fuels, 22(5), 3363– 3375.

Zhang, L. (2007). Physical and mechanical properties of model asphalt systems calculated using molecular simulation (Paper AAI3301932). [Doctoral dissertation, University of Rhode Island].

Zhu, H., Yuan, H., Liu, Y., Ding, Y., & Fan, S. (2020). Evaluation of self-heal performance of asphalt concrete for materials via microwave heating. Journal of Materials in Civil Engineering, 32(9).

Zhou, X., Sun, B., Wu, S., Zhang, X., Liu, Q., & Xiao, Y. (2019). Evaluation on self-healing mechanism and hydrophobic performance of asphalt modified by siloxane and polyurethane. Journal of Wuhan University of Technology-Mater. Sci. Ed., 34, 630–637.




How to Cite

Li, D., Luo, Y., Jiao, X. L., Li, Q., Zheng, C. F., & Teng, G. C. (2022). Analysis of the Self-Healing Process of Asphalt and its Influencing Factors. The Baltic Journal of Road and Bridge Engineering, 17(3), 146-169.