Effect of Aggregate Gradation on Workability of Hot Mix Asphalt Mixtures

Authors

  • Iman Haryanto Highway Engineering Laboratory, Dept of Civil and Environmental Engineering, Nagaoka University of Technology, 1603-1 Kamitomiokamachi, Nagaoka, Niigata, Japan
  • Osamu Takahashi Dept of Civil and Environmental Engineering, Nagaoka University of Technology, 1603-1 Kamitomiokamachi, Nagaoka, Niigata, Japan

Keywords:

workability, index, HMA mixture, compaction, aggregate gradation, interlocking, aggregates packing

Abstract

The ease of hot mix asphalt (HMA) mixture for compacting describes workability of the HMA mixture. This study developed a simple workability index (WI) and applied it to investigate effect of aggregate gradation on workability of HMA mixtures. Such mixture specimens were prepared with 6 types of aggregate gradation. The Marshall compactor and the steel roller compactor were employed to fabricate the specimens. The index was applied to identify workability of HMA specimens, even though they were fabricated with different compactors. WI of HMA mixture was low, when the fraction of stone or sand within the HMA mixture was high. Interlocking makes the aggregates difficult to displacement by compaction. WI of HMA mixture can be high, when the mixture uses aggregate gradation falling slightly above the Fuller curve. Sand particles within the aggregate gradation, contacts disappear between stone particles, so interlocking of stone particles is weak. As a result, the stone particles are easily shifted by the compaction load.

References

Gudimettla, J. M.; Cooley, L. A.; Brown, E. R. Workability of Hot Mix Asphalt: NCAT Report 03-03, Auburn, Alabama, 2003. 66 p.

Chatterjee, S.; White, R. P.; Smit, A.; Prozzi, J.; Prozzi, J. A. Development of Mix Design and Testing Procedures for Cold Patching Mixtures. Center for Transportation Research, The University of Texas at Austin, Jan 2006, p. 1–2.

Chadbourn, B. A.; Newcomb, D. E.; Voller, V. R.; Desombre, R. A.; Luoma, J. A.; Timm, D. H. An Asphalt Paving Tools for Adverse Conditions. University of Minnesota and Minnesota Dept of Transportation, 1998.

Oliver, J.; Alderson, A. Development of An Asphalt Workability Index: Pilot Study, Austroads Inc., Sydney, 2006.

Von Quintus, H. L.; Scherocman, J. A.; Hughes, C. S.; Kennedy, T. W. Asphalt-Aggregate Mixture Analysis System AAMAS: NCHRP Report 338, Transportation Research Board, Washington DC, 1991, p. 72–73.

Vavrik, W. R.; Huber, G.; Pine, J. W.; Carpenter, S. H.; Bailey, R. Bailey Method for Gradation Selection in HMA Mixture Design: TR Circular Number E-C044, Transportation Research Board, Washington DC, Oct 2002.

Putra, S.; Ismanto, B. I.; Widodo, P. Workability Assessment of Asphalt Concrete Mixture at Various Gyratory Compaction (Penilaian Workability Campuran Beton Aspal dengan Berbagai Variasi Pemadatan Gyratory). In 4th Symposium Forum of Transportation Studies Inter Universities, Nov 8, 2001, Electronic Edition, Denpasar, Indonesia, p. 8 (in Indonesian).

Sung, I. H.; Lee, H-S.; Kim, D. E. Effect of Surface Topography on the Frictional Behavior at the Micro/nano-scale, Wear, 2003, Vol, 254, p. 1091–1031.

Potgieiter, C. J. Bitumen Rubber Asphalt: Year 2003. Design and Construction Procedure in South Africa. In: 8th Conference on Asphalt Pavements for Southern Africa (CAPSA ’04), Sept 12-16, 2004, Sun City, South Africa, p. 15, http://asac.csir.co.za/capsa/Documents/015.pdf accessed on Dec 5, 2006.

Douglas, K. J. The Shear Strength of Rock Masses, PhD dissertation, The University of New South Wales, Sydney, Australia, Dec 2002, p. 4.58, http: http://www.library.unsw.edu.au/~thesis/adt-NUN/public/adt-NUN20040107.094847/index.html accessed on Dec 5, 2006.

Directorate General of Highway – Republic of Indonesia. Indonesian National Standard of Road Pavement (Standar Nasional Indonesia Mengenai Perkerasan Jalan), Jakarta, 2002 (in Indonesian).

Downloads

Published

27.03.2007

How to Cite

Haryanto, I., & Takahashi, O. (2007). Effect of Aggregate Gradation on Workability of Hot Mix Asphalt Mixtures. The Baltic Journal of Road and Bridge Engineering, 2(1), 21-28. https://bjrbe-journals.rtu.lv/bjrbe/article/view/1822-427X.2007.1.21%E2%80%9328